NEED MANUAL FOR TOPEAK COMP 150
June 9, 2006
I have lost the manual for setting
up my Topeak Comp 150. I replaced the batteries and need
to re-set it up.
I could not find anything using
Google on the Web as far as an instruction manual. Can you
help me?
Jeffrey J.
Jeffrey:
Good thing you bought a device from
a company that stands by their product. A dicey proposition
when it comes to computers, as you probably know (judging
from your e-mail address).
In the past you could simply download
the manual from the Topeak
Web site. Not any more. However, the helpful folks at
Todson
(who own Topeak) sent me the instructions that appear below.
If you’ve
questions about these directions, don’t
ask me (I just fixed the punctuation);
call Todson’s customer service at 800/213-4561.
Mr Bike
-----------------
Initial set up
1 Press and hold set button (4) and the mode button (2)
simultaneously for 3 seconds.
2 Self test should begin (888,777,666,555,444, etc.).
3 Click Mode button (2) to break out of the self test.
4 Screen will now show Km/h or mph blinking in the right
hand corner.
5 To switch between the Kmh and mph simply click the mode
button (2) to select the distance reading.
6 Press the set button(4) to complete the “unit selection”
and move on to bike 1 ODO setting.
7 To input Bike #1 ODO distance click Mode button (2) to
select the desired digit value.
8 To move onto the next digit place, press and hold mode
button (2) for at least 2 seconds (the next digit place
should begin to blink).
9 Repeat step 7 & 8 until desired number is entered
(Bike #1 ODO).
10 Press Set button (4) to move on to Bike #2 ODO.
11 Repeat steps 7& 8 desired number is entered (bike
#2 ODO).
12 Press Set button (4) to move on to T.Tm.
13 Repeat step 7 & 8 until desired number is entered
(T.Tm).
14 Press Set button (4) to move on to Bike #1 Circumference.
15 repeat step 7 & 8 until desired number is entered
(Bike #1 Circumference).
16 Press Set button (4) to move on to lube reminder
17 Repeat step 7 & 8 until desired number is entered
(lube reminder). A value of 00000 can be entered if you
wish to bypass the lube reminder function.
18 Set button (4) to move on to Mainantance reminder.
19 Repeat step 7 & 8 until desired number is entered
(maintenance reminder). A value of 00000 can be entered
if you wish to bypass the maintenance reminder function.
20 Set button (4) to move on to clock set up.
21 Click the mode button (2) to change the time mode: 12
hour AM, 12 hour PM, or 24 hour clock.
22 Press and hold the mode button (2) to move to the clock
set up (the first digit of the clock should be blinking).
23 Repeat step 7 & 8 until desired number is entered
(clock).
24 Press Set button (4) to complete set up.
25 The computer should be in normal mode at this point.
To Set up bike # 2 circumference
Switch to the Bike #2 mode then scroll through the different
modes to the ODO screen.
Press the set button (4) and the first digit of the circumference
will be blinking.
Repeat step 7 & 8 until desired number is entered (Bike
#2 Circumference).
Press set button (4) and the computer will return to normal
riding mode.
How to recalibrate the computer wheel size
Select the desired circumference as per the wheel chart
or rollout method.
To adjust the time after set up is completed
In Either mode (Bike #1 or #2) scroll to clock screen.
Press set button and the unit of time should be blinking.
C lick the mode button (2) to change the time mode: 12 hour
AM, 12 hour PM, or 24 hour clock.
Press and hold the mode button (2) to move to the clock
set up (the first digit of the clock should be blinking).
Repeat step 7 & 8 until desired number is entered (clock).
Press Set button (4) to complete set up.
The computer should be in normal mode at this point.
Back to questions
|
|
|
|
